Eternal S-Type JM Special Edition

 

Eternal Guitars
Authentically aged replica electric guitars. Built in Britain using the best quality components and finished in genuine nitro-cellulose lacquer.
‘JM’ S-Type
Limited Edition 1 of 30

Eternal Guitars. 'JM’ S-Type Limited Edition 1 of 30

Authentically aged replica electric guitars.

Built in Britain using the best quality components and finished in genuine nitro-cellulose lacquer.

A heavily worn alder two piece body showing the bare remains of a black nitrocellulose finish is mated to a worn maple neck. Topped with a rosewood fingerboard and 21 Dunlop 6105 frets - we set the action low for a 7.25” radius ’board, but every bent note is choke free and clean. A minty green scratchplate compliments the finish with aged knobs and other plastic fittings. Hardware is all spot-on vintage spec. and aged to match the body and neck wear while three Eternal Guitars single coil pickups provide all the chime and warm response you could ever expect from a three pickup guitar.

Eternal ‘JM’ S-Type Specifications

Neck: Maple finished in aged nitrocellulose with a rosewood 7.25” radius fingerboard and Dunlop 6105 fretwire

Body: Two piece alder

Finish: Heavily aged black nitrocellulose lacquer

Hardware: Aged steel block vintage style vibrato with pressed steel saddles. Split post aged nickel finish tuners.

Electrics: Handwound and aged ‘Eternal Guitars’ bridge and neck single coil pickups: Our S-Type sets begin with hand tooled UK finished bobbins, made of Forbon (compressed fibre) with Alnico 5 staggered polepieces, which are bevelled and then aged both physically and aesthetically. The coils are then handwound using 42 gauge wire and cloth covered hook-up wire. All the pickups are wax potted and each set of covers is individually aged according to taste using hand methods over a period of time to give anything from a ‘plain old look’ to pickups that have seen 50 odd years of very hard misuse. This process can take far longer than actually making the pickup. As each set is individually handwound, they have an average DC reading between 5.4k Ohms and 5.6K Ohms with a typical output of 2.4 Henries. Each set is unique and calibrated, after testing they are engraved before final audio testing. A CRL 5-way switch, Orange Drop Capacitor, CTS split shaft 250k pots, cloth covered hook-up wire and a Switchcraft output jack complete the wiring.

Nut: Hand cut bone

Case: Tweed hardcase included

Price: £1699

 

FULL REVIEW HERE

Eternal S-Type JM Special Edition

Price: £1,699.00

Logos